December 20, 2007
Graphics and photos are available at:
The Midnight Ride of the CMS Tracking Detector
Batavia, Ill. -- Scientists of the U.S. CMS collaboration today (Dec. 20) joined colleagues around the world in announcing the successful installation of the world's largest silicon tracking detector at CERN in Geneva, Switzerland. Just before midnight on Wednesday, Dec. 12, the six-ton CMS Silicon Strip Tracking Detector began a ten-mile, three-hour journey from the main CERN site to the CMS experimental facility. Later that day, workers carefully lowered it 90 meters into the underground collision hall for the CMS experiment at the Large Hadron Collider particle accelerator. Installation began on Saturday, Dec. 15, and concluded early Sunday morning.
Of the CMS collaboration's approximately 2,300 physicists, about 500 are U.S. scientists, from more than 45 U.S. universities and Fermilab, supported by the Department of Energy and the National Science Foundation. The U.S. is the largest single national group in the experiment, and U.S. scientists have built and delivered several key elements of the CMS detector to CERN.
Physicist Dennis Kovar, acting associate director for High Energy Physics at DOE's Office of Science was on the scene in Geneva as the tracker descended into place. "It was remarkable to watch the team of scientists as the CMS detector comes to completion," Kovar said. "The tracker represents an extraordinary technological feat. I congratulate the CMS collaboration on their achievement and look forward to celebrating their next milestone."
The DOE's Fermi National Accelerator Laboratory near Chicago is the host laboratory for U.S. CMS. Fermilab participated in the construction along with Brown University, University of California Riverside, University of California at Santa Barbara, University of Illinois at Chicago, University of Kansas, Massachusetts Institute of Technology, and University of Rochester.
"This is a major milestone," said Joseph Incandela of the University of California at Santa Barbara, U.S. tracker project leader. "All of the myriad components from universities and laboratories around the world are now assembled in one place. The detector is finally taking shape in its home. For some of us, this road started ten years ago, and the final destination is very satisfying."
Physicists from the U.S. built and tested 135 of the 205 square meters of the Silicon Strip Tracking Detector. With an area about the size of a singles tennis court, it is by far the largest semiconductor silicon detector ever constructed. Its sensors are patterned to provide a total of 10 million individual sensing strips, each read out by one of 80,000 custom-designed microelectronics chips. Forty thousand optical fibers then transport data into the CMS data acquisition system.
The silicon sensors are precision mounted onto 15,200 modules. These are in turn mounted onto a very-low-mass carbon fiber structure that maintains the position of the sensors to 100 microns, or less than the diameter of a human hair. "The silicon strip detector operates like a high speed photographic camera, capable of taking 40 million images a second," said Fermilab physicist Slawek Tkaczyk.
Component fabrication started in clean-room facilities at Fermilab and the University of California at Santa Barbara in 2004. Final assembly of the silicon tracking detector began in December 2006 and reached completion in March 2007. Collaborators then partially commissioned the detector's systems in a test phase, operating 20 percent of the full detector over several months and recording the tracks from five million cosmic rays. Physicists rapidly analyzed the results from these data, using the experiment's Grid-based distributed computing system. This partial commissioning demonstrated that the detector fully meets the experiment's requirements.
"Constructing a scientific instrument of this size and complexity, designed to operate at the LHC without intervention for more than ten years, is a major engineering and scientific achievement," said CMS spokesman Tejinder Virdee. "More than five hundred scientists and engineers from fifty-one research institutions world-wide have contributed to the success of the project."
Full commissioning will start soon in the underground collision hall to prepare for data taking in the spring or summer of 2008.
"We are now one major step closer to discovering new physics that promises to change our understanding of the universe," said Joseph Dehmer, director of the Physics Division at NSF. "We are proud of the U.S. scientists' significant contribution to this international state-of-the-art detector."
Institutions involved in the CMS tracker project are located in Austria, Belgium, CERN, Finland, France, Germany, Italy, Switzerland, the United Kingdom and the United States.-30-
Notes for editors:
Photos are available at http://www.fnal.gov/pub/presspass/images/CMStracker.html
The United States contributions to the CMS experiment and the Large Hadron Collider are funded by the Department of Energy's Office of Science and the National Science Foundation.
CERN is the European Organization for Nuclear Research, with headquarters in Geneva, Switzerland. At present, its Member States are Austria, Belgium, Bulgaria, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Netherlands, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. India, Israel, Japan, the Russian Federation, the United States of America, Turkey, the European Commission and UNESCO have Observer status.
Fermi National Accelerator Laboratory is the host laboratory for the US CMS Collaboration. Fermilab is a Department of Energy National Laboratory operated under a contract with DOE by the Fermi Research Alliance.
US CMS member institutions
|last modified 12/20/2007 email Fermilab|