List of changes between v4_0 and v4_1 bin GNUmakefile jurgen: add guoutobjs as dependency to ckm_add jurgen: more debug compiling jurgen: Clean up, add debug compilation bivs GNUmakefile.bivs jurgen: Clean up, add debug compilation bivs_guout.F caroline: write_out number of hits for zero hits too caroline: Separate the number of hits from the track info ramberg: Make changes to allow adding event with 'ckm_add' bivs_gustep.F caroline: Set iswit(3) to 2 for debug prints (and to 1 for dump) caroline: Replace nlevel by its absolute location caroline: Change indexing caroline: take out switches display GNUmakefile.display jurgen: Clean up, add debug compilation dis_ckm_geom.F jenkins: Hardwire in Keat Z positions for now... 27 c dis_event.F jenkins: to display expanded plan view that includes the UMS and DMS hits and tracking. These views may be printed out as a post script file or encapsulated post script file. jenkins: Add eps file printout for combined views and vvs view.. dis_hit.F jenkins: include expanded plan view hits.... jenkins: Remove false hits in the DMS straw chambers. dis_spec.F jenkins: initialized. include an expanded plan view of the UMS and DMS dis_track.F jenkins: remove bug where Rich information will not print if there are no muon hits include rich information in the expanded plan views... jenkins: include the expanded X views... driver GNUmakefile.driver jurgen: add dmag_geom jurgen: Clean up, add debug compilation ckm_dim.inc caroline: Include the magnet of the beam dump ckm_media.inc caroline: Include the medium of the magnet of the beam dump ckm_pos.inc caroline: Position of the magnet of the beam dump added ckmgeom.F caroline: Added the BM109 magnet of the beam dump godang: recommit ckmgeom.f in getting the perl executable correctly. this is due to the cvs machine was moved physically. godang: modify gold-coated kapton as 1000A each side (2000A in total) caroline: z position of HVS to the printout of detectors positions dmag_geom.F caroline: change magnet half-width to 91.5cm caroline: try 3- CVS Header trailer caroline: try2 caroline: Add the magnet of the dump dmag_geom.kumac caroline: BM109 exact shape and dimensions caroline: cvs header-trailer added caroline: Add the beam dump dipole gene_bm.F caroline: Generate the pion of the decay as well gufld.F caroline: take care of the magnetic field in the dipole of the dump gukine.F caroline: Generate the pion of the decay as well kpar.hbook jurgen: updates by Caroline ckmgeant.html jurgen: prepare for v4_1 examples drawckm.kumac caroline: Decrease the z expansion of the detector to include HVS drawckm2.kumac caroline: Change expansion factors and add the axis of the current picture fvs GNUmakefile.fvs jurgen: Clean up, add debug compilation hvs GNUmakefile.hvs jurgen: Clean up, add debug compilation hvs_geom.F caroline: HVS repositionning in x hvs_gustep.F caroline: HVS repositionning keat GNUmakefile.keat jurgen: Clean up, add debug compilation mvs GNUmakefile.mvs jurgen: Clean up, add debug compilation read BIVS_read.F caroline: read number of hits for zero hits too caroline: write in a separate line the number of hits in BIVS CKM_read_user.F ramberg: Took out reference to zvtx; replace with vertex(3). Also count number of Monte Carlo decays correctly. GNUmakefile.read jurgen: Clean up, add debug compilation VVS_read.F caroline: Allow to read-in the 4PMT configuration(in4pmt=1) or 3PMT configuration caroline: 4PMT- interleaved 2 by 2 for VVS as in the proposal 2 caroline: Read number of hits for zero hits caroline: Number of VVS hits recorded in a separate line dmsana.F hogann: Added variables to keep track of which hits were used by the track fitter. Added variables for the chi2 contributions of the X view, Y view, and of each hit. Increase the maximum allowed track chi2 from 100 to 1000 inorder to increase efficiency. Added segment-fitting routines to perform only upstream and downstream segment finding. The "offmag" quantities are calculated. All this will be described in an upcoming CKM note. dmsana.inc hogann: Added variables to store track hits used in fitting, slopes and intercepts from the new segment finding, offmags, and tons of chi2's. find_vtx.F ramberg: Put in KEAT determined slopes to find vertex location and DOCA. richana.F jurgen: add calibration for angle measurement richana.inc jurgen: add calibration for angle measurement jurgen: new radius calibration for new PMs jurgen: new prich calibration jurgen: fix radius calibration rich GNUmakefile.rich jurgen: Clean up, add debug compilation cerenkov.F jurgen: fix typo, screwed number of photons scripts make_ckmgeant_version.sh jurgen: build debug executable straw GNUmakefile.straw jurgen: Clean up, add debug compilation ums GNUmakefile.ums jurgen: Clean up, add debug compilation utility GNUmakefile.utility jurgen: Clean up, add debug compilation vvs GNUmakefile.vvs jurgen: Clean up, add debug compilation vacu_geom.F caroline: Windows attached to the vacuum vessel vvs_gukine.F caroline: 4PMT- interleaved 2 by 2 for VVS- vvs_guout.F caroline: allow to write out both configurations-4Pmt (in4pmt=1)or 3Pmt (otherwise) caroline: 4PMT- interleaved 2 by 2 for VVS- as in Proposal 2 caroline: write_out number of hits for zero hits too caroline: Typo correction in the write statement caroline: Number of hits separated from the track Info caroline: format change - Number of hits in a single line ramberg: Make changes to allow adding events with 'ckm_add' vvs_gustep.F caroline: Both configurations 4PMT if flag in4pmt=1(setup in vvs_init)- 3PMT otherwise caroline: 4PMT - interleaved 2 by 2 - as in Proposal 2 caroline: set iswit(3) to 2 for debug prints (to 1 for dump) caroline: Nlevel replaced by its absolute value caroline: Indexed PMTs and showers vvs_init.F caroline: Flag setup in4pmt =1 for 4PMTs otherwise 3PMTs caroline: 4 PMT for VVS-interleaved 2 by 2- as in the Proposal 2 vvscom.inc caroline: Add flag in4pmt- setup in VVS_init-4 PMTs if in4pmt=1, otherwise 3PMTs caroline: Account for 4 PMTs- interleaved 2 by 2 - as in Proposal 2 ramberg: Increase max_vvsdata to accomodate large merged events in ckm_add