|
|||
|
|
|||
|
|
|
||
Fermilab Engineering Standards Manual
August,August 20012
PREAMBLE
Any Fermilab standard, or a part of a standard, which is directly related to safety, will be in the Fermilab ES&H Manual. Only the technical instructions or reproductions from the National Standards, other codes, or sources of technical information will reside in the Fermilab Engineering Standards Manual.
The Fermilab Engineering
Standards Manual is supplementary to the Fermilab ES&H Manual. Engineers
shall consult first with the ES&H manual for safety considerations, thenand then seek
the supplementary instructions and technical data in the Engineering Standards
manual.
A policy for administration of the Fermilab Engineering Standards Manual is established in Chapter 1. This policy includes formalized procedures for writing, updating and deleting chapters as well as for changing the status of a chapter, e.g. from guidance to advisory, or from guidance to mandatory. The Engineering Policy Committee is advisory.
The status of each chapter is to be interpreted as follows:
Mandatory: Mandatory engineering standards shall be used. The Fermilab Director or other specified external authority must approve any deviation from the recommendations spelled out in the chapter.
Guidance: Guidance engineering standards should be used. The authority, as specified in the chapter, must approve any deviation from the recommendations spelled out in the chapter.
Advisory: Advisory engineering standards are suggestions for good practices. Use is optional and better recommendations may be sought from other sources.
Although a chapter may have a mandatory status, it may contain mandatory, guidance, or advisory requirements. For example, the chapter "Installation of liquid nitrogen dewars" has mandatory provisions, standard practices and suggested practices.
Chapter
1: Administration
The
Associate Director
forof
Operations Support will be the custodian of the Engineering Standards Manual. He is responsible for the maintenance of the manual and the
issuance of updates as applicable. All Fermilab Engineering Standards require
review and approval of the Fermilab Engineering Policy Committee. Approved standards shall be incorporated into the Fermilab
Engineering Standards Manual, made available by the FESS Directorate Section
with web site support from the Administrative Associate to the Director for Operations
Support. ES&H Section.
The
manual shall be reviewed annually as scheduled by the Associate Director for Operations
Support
FESS Section Head. The reviewing agency will be the Engineering
Policy Committee. All
standards in the manual shall be reviewed for applicability to Fermilab and
adopted or modified as necessary. The
Associate Director for Operations Support shall approve any changes and .
The FESS Section Head will be responsible for updating and
re-issuing the manual after each review if necessary.
Requests
for new or modified Fermilab Engineering Standards may also be internally
initiated by Fermilab staffFermilab staff may also internally initiate requests
for new or modified Fermilab Engineering Standards. In this case the Associate Director for Operations
SupportFESS Section Head will forward the
request to the Engineering Policy Committee whichCommittee, which
will evaluate the request, formulate a response, and return forward
it to the Associate Director for Operations Support FESS
Section Head for appropriate action as determined by the
Engineering Policy Committee. All
changes to the Fermilab Engineering Standards Manual shall be approved by the
Associate Director for Operations SupportThe Associate
Director for Operations Support shall approve all changes to the Fermilab
Engineering Standards Manual after appropriate additional review.
Self-assessments
performed, as part of the ongoing Fermilab Self-Assessment Program, shall
include assessment of the Fermilab Engineering Standard Manual to assure that
actual practices or operations are consistent with the intent of the Fermilab
Engineering Standards Manual and any implementing procedures.
Chapter 2: Civil Engineering Standards
2.1 General Requirements
2.1.1 AestheticsArchitectural
Approvals - - Mandatory
All
proposed modifications that affect the exterior appearance of buildings or modify
landscaping, roads or parking areas are to be reviewed and accepted by the
Directorate.
2.1.2 Approval for Modifications to Buildings and
Systems - - Mandatory
2.1.3 As-Built Documentation - - Reserved
2.1.4 Permits for Modifications to Critical Systems
- - Reserved
2.2 Civil
2.2.1 Design Criteria Matrix to N&S Standards -
- Mandatory
|
2.2.1
CIVIL DESIGN CRITERIA |
U.S. CODE OF FEDERAL |
|
|
|
|
|
EXECUTIVE ORDERS |
|
|
|
STATE OF ILLINOIS STANDARDS |
|
|
|
|
FERMI STANDARDS |
|
|
|
|
REGULATIONS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DESIGN
ELEMENTS |
10
CFR 1021 (DOE NEPA rules) |
29
CFR 1910 (OSHA Gen Ind Stds) |
29
CFR 1926 (OSHA Constr Ind Stds) |
71
IAC (Illinois Accessibility Code) |
77
IAC 920 (Water well constr code) |
77
IAC 925 (Well pump installation) |
92
IAC 700 (Constr/water course permit appl) |
92
IAC 704 (Regulation of public waters) |
Nat'l.
Poll Disch Elim System |
92
IAC 708 (Floodway constr permit appl) |
Illinois
Standard for Road and Bridge Construction |
Standards
and Specifications for Soil Erosion and Sediment Control 10/87, IEPA 87-102 |
Uniform
Federal Accessibility Standards, Ch 4, Accessible Elements and Spaces: Scope
and Technical Requirements |
IDOT
Design/Standards Manuals |
Illinois
Standards For Sewer and Water Construction |
Secondary
Containment for oil filled Transformers (Draft) |
|
|
|
Civil
Construction Projects |
x |
x |
x |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Construction
Projects involving Waters of the State |
|
|
|
|
|
|
x |
x |
x |
x |
|
|
|
|
|
|
|
|
|
Construction
Projects > 5 acres in size |
|
|
|
|
|
|
|
|
x |
|
|
x |
|
|
|
|
|
|
|
Excavation |
|
|
x |
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
|
Erosion
Control Design |
|
|
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
|
Water
Well Installation |
|
|
|
|
x |
x |
|